Semi Automatic Glue Dispenser Machine Solder Paste Controller GlueDropper Glue Liquid Adhesive Dispensing Machine with Timer Controlled

DescriptionAre you affected by the slow speed of traditional drip glue, which affects productivity? Are you often wasting a lot of glue material? Do you feel that the precision of glue dripping is low and difficult to control?Choose this semi-automatic glue dispenser machine, which can precisely control the dripping speed and improve the working efficiency, bringing you a more efficient and energy-saving working experience!SpecificationColor: BlackModel: 982Material: MetalSpitting Mode: Manual / Semi-automaticMinimum Drip Volume: 0.01mlSpitting Time Interval: 0.1-9.9sAutomatic Timing(Can Be Set): 0.01-30sRepeat Accuracy: ±0.5%Internal Voltage: 12-24DCInput Air Pressure: 2.5-7bar(35-100psi)Output Air Pressure: 0.1-5.5bar(1-78psi)Power Supply: 110V AC, 60HzPower Consumption: 20WPlug Specification: American Standard 110VProduct Size:23*15*6cm/9.05*5.9*2.36inPackage Size:20*26*14cm/10*9*12.5inGross Weight: 2.1kg/4.63 lbsPackage Included1* Dispenser Main Unit1* Manually Switch1* Foot Switch1* Air Tube1* Connection Tube1* Power Cord1*Dispenser Stand2* 30CC Liquid Barrels6* Dispensing Needles1* Chinese and English ManualNote1. The input high pressure should not exceed 7 bar (100psi), and the maximum working pressure of the glue dropper should not exceed 5.5 bar (78psi). If the working air pressure is above 4 bar, please switch to aluminum connectors.2. If available, store all materials at a constant temperature (5°) as directed to ensure that the concentration does not change significantly during use.3. When the material concentration is too large (flow difficulties), can not drip, if you want to use it, according to the manufacturer's instructions dilute the use; before work, the material must be fully stirred evenly to ensure that the size of the drip consistent.4. Automatic state, the general air pressure adjustment in the machine at 1-2.7bar (15-40psi) is more appropriate. When working in the automatic state, the strength of the vacuum tube pumping back air should be adjusted to the proper position. Too much pumping back will flush the piston and destroy the normal operation.5. Automatic state work, according to the actual situation, timely removal of the material left at the needle nozzle, these materials gradually curing will block the muzzle discharge and back pumping; after work, the barrel should be cleaned in time, otherwise, the barrel's disassembly will be very difficult.

• Vacuum Back Suction and Precision Dispensing (0.01mL Accuracy): This semi-automatic glue dispenser features vacuum back suction technology to prevent drips and ensure clean operation. Achieves 0.01mL minimum drip volume with 0.5% repeat accuracy, perfect for delicate electronics, jewelry, and precision assembly work
• Dual-Mode Operation (Auto/Manual) for Versatile Use: Switch between fully automatic timed dispensing (0.1-9.9s intervals) or manual single-hole control for flexibility. The high-quality electronic valve enables instant starts, boosting productivity by 80% compared to manual methods
• Industrial-Grade Durability with Stable Performance: Constructed with all-metal housing and 4th-gen circuit board design.The all-copper coil transformer stabilizes voltage for high-frequency operation while the precision air pressure gauge prevents hose bursts
• Safety-Enhanced Design for Professional Workshops: Includes anti-slip feet and rounded corners for workplace safety. The anti-impregnation electronic valves extend equipment lifespan, making it ideal for epoxy resins, quick-drying glue, and industrial adhesives
• Wide Compatibility with Quick Setup: Works with most market adhesives (yellow glue, epoxy, etc.) for bonding electronics, machinery, and instruments. No complex calibration needed - operational immediately after installation